FILTRATION SYSTEM - 400 CHEM/BIO |
|
Filtration system removes chemical and biological agents and harmful airborne particulates and vapors. Filtration system delivers up to approximately 400 CFM, working at max air flow provides min 12 air changes per hour for rooms ≤ 2000 cubic feet*, meeting flow requirements of the “CDC Guidelines for Environmental Infection Control in Healthcare Facilities”. *Note: Subject to Room Leakage.
|
| Includes: |
- Pleated pre-filter
- Digital display of the system status
|
|
- Upper and Lower Alarm and Warning set points
- Wheels and handle for easy and safe movement
|
| |
|
| Triple element filter design | |
Extends filter life while assuring effectiveness |
| Pleated pre-filter | |
Allows gross filtration removing large particulate matter |
| Monitors positive or negative room/shelter pressure and displays on digital readout | |
| Monitors the pressure drop of the system filters | |
Indication of possible filter change |
| Audible and visual indicators | |
Alerts the user when the system is in an alarm or warning state |
| Data Port (Optional Software for data logging of room/shelter pressure and alarm/warning conditions) | |
Electronically captures unit events for future reference |
| Can be used in conjunction with TVI's infection control shelters or as a stand alone unit for rooms | |
| Vertical design minimizes footprint | |
Easily rolls around on wheels with handle for easy and safe movement; optimizes floor space |
| |
|
| Part Number | |
FS-CB-04-1 |
| Capacity | |
0-400CFM |
| Casing Construction | |
Continuously welded, stainless steel enclosure |
| Preset Audible Warning | |
Set-point Preset at High is } 03, Low is } 01 inches of water after 10 second delay, latched on till acknowledged (user adjustable) with software |
| Power Requirements | |
120 volt AC, 1 phase, 3.5 Amp |
| Dimensions - Weight | |
21" W x 18" D x 60" H - 186 lbs Approx |
| Duct Size | |
8" SlipLoc Duct Type Connection |
| Filters- Pre- | |
High Capacity ASHRA |
| Filters- HEPA | |
HEPA High Capacity 99.99% @ .3 micron HEPA FilterTested to IEST-RP-CC007 and IEST-RP-CC034 |
| Carbon Adsorber | |
ChemPakTM Carbon Adsorber filters out chemical vapors and has been design qualified at U.S. Army Lab, SBCCOM, Edgewood and displays 15 minutes of DMMP life at 99.9992% efficiency when challenged with 5000 mg/m3 DMMP |
| |
|
OPTIONS
- Software package allows Data Logging and set-up parameter adjustment.
- Remote display-duplicates units status display. Includes 25 foot cable.
- FS-CB-04-02; 230V, 50hz operation Note: 20% reduction in max airflow.
THE FILTRATION SYSTEM COMPLIES WITH OR EXCEEDS THE AEROSOL TESTING REQUIREMENTS FOR:
ALLOWS USER TO COMPLY WITH OSHA AND CDC GUIDELINES FOR ENVIRONMENTAL INFECTION CONTROL IN HEALTHCARE FACILITIES |
| |
